Bobcat^® T180 and T190 Drive Sprocket

This is one of the optional aftermarket replacement drive sprockets for the Bobcat^® T180 and T190 compact track loaders. This is the original style sprocket for the original models for the Bobcat^® compact track loaders.

Sprocket specifications:

• 15 Teeth
• 6 Bolt Holes
• Inside Diameter: 3 3/4 Inches
• Outside Diameter: 16 1/2 Inches
• Depth: 5 1/2 Inches

If you have changed to the new drive motor you will need the deeper sprocket under part number 6736306AM, which comes current on new stock T180 and T190 models. This sprocket normally fits up to serial number 231611000 assuming the drive motor has not been updated. Any serial number after that would require the 6736306AM deeper dish sprocket.

This original part number from the dealer is 6726052 but the stamp on the sprocket is most likely 6726051, which is just a casting number so if your sprocket has 6726051 stamped in it, then this is the sprocket you are looking for. Call us with any questions and we will guide you to the correct sprocket for your Bobcat ^® track loader.