Rubber Track for Ditch Witch^® MX27 Case CX27B

Buy your aftermarket replacement rubber tracks for Ditch Witch^® MX 27 and Case^® mini excavator models CX 27B and CK 32. The tracks are almost twelve inches (300 mm) wide with eighty metal embedded links down the center.

The original track is more narrow so please verify your clearance for the extra width and please call if you have any questions. You will need an extra inch of clearance on each side for the Case^® but this is the stock OEM original track size for the Ditch Witch^® MX27.

We now stock the OEM width rubber track option for the Case CX 27B. The original size is less than ten inches wide and can be found here: OEM Case CX27B wdth.

There may be tread pattern alternates available to the one shown so call if your tread pattern is a priority and we can get a picture of the actual tracks you will receive.

Rubber Track Tread Patterns Commonly Available

The directional tread pattern is commonlly referred to as the Chevron tread pattern due to the directional nature of the tread pattern. Typically mini excavator tread patterns are not critical factors in the rubber track purchase decision but if you require an exact tread pattern please let us know. The directional type tread pattern varies during production throughout the year.

Case CX 27B Sprocket PV51D01002P1 Case CX 27B Top Roller PW64D01017F1 Case CX 27B Bottom Rollers PX64D00009F1