This is the aftermarket replacement rubber track size for Bobcat® model E-16 and E-17. It also fits some older model Bobcat® mini excavators as well. There is a significant undercarriage difference in the x322, x323, x320 series versus the regular 322, 323, and 320 series. Please verify the dimensions and number of links on your rubber track prior to ordering. This rubber track is nine inches (230 mm) wide with thirty three metal embedded links down the center of the track. It is possible that you have a short pitch version of the track installed on your machine and you have sixty six steel forged embedded links down the center of the track where the sprocket rotates the track. In either case this track is guaranteed to fit your machine. Older model Bobcat® 320 mini excavators in the serial number range of 511720001 and above take a different rubber track, please see MEPC-0525 and the MEPC-0425 option if your 320 mini excavator is in that serial range.
The directional tread pattern is commonlly referred to as the more aggresive option due to the directional nature of the tread pattern. Typically mini excavator tread patterns are not critical factors in the rubber track purchase decision but if you require an exact tread pattern please let us know. The directional type tread pattern varies during production throughout the year.
This staggered pad tread pattern is commonlly referred to as the more turf-friendly option due to the larger contact pads proving less ground pressure. Typically mini excavator tread patterns are not critical factors in the rubber track purchase decision but if you require an exact tread pattern please let us know. The tread patterns vary during production throughout the year.
© Copyright 2022 Rubbertrax, Inc. - MiniExcavatorParts.com. All Rights Reserved.
All manufacturers, names, symbols and descriptions are used for customer reference needs only, and it is not implied that any parts or rubber tracks are original products of the manufacturer.