Toro Dingo TRX15 ~ TRX20 Rubber Track

This is the replacement rubber track for your Toro STX-16 and STX-26 model compact tool carrier. This narrow track option is less than six inches wide. The track size is known as a 149x88x22 which means it is one hundred and forty-nine milimeters wide with twenty-two drive lugs down the center of the track.

Make sure to frequently check your bottom rollers on your Toro STX-16 and STX-26. If your bottom rollers are out of line on your Dingo it will tear up the inside rubber track lugs quickly. Properly tensioning the rubber track and lining up your bottom rollers will extend the life span of your replacement Toro Dingo rubber tracks. If your drive lugs are chewed up from the side that is a sure sign that the rollers are out of alignment.

These toro tracks are small enough to ship via Fedex ground in individual boxes. Our aftermarket Toro^® tracks are are backed by the factory for a one year period against manufacturing defects. Our tracks are high quality, steel cord reinforced with a long proven history of high quality. We always suggest checking your tensioner for fatigue when you install your new tracks. If your tracks skip after installation then that is an indication of a fatigued track tensioner that needs to be replaced for proper track tensioning.

It is common for the tensioner to wear at a similar rate as the rubber tracks, so if your track appears to be jumping off after installing the new track then you need to replace your tensioner. Sometimes with your older and fatigued track the tensioner is not noticable but when you put the new heavy duty version on your machine the tensioner is not capable of maintining tension.