New undercarriage parts and rubber tracks are sold individually but we suggest replacing all of your worn parts at the same time.
This is the aftermarket Ditch Witch® SK750 hub and spindle assembly that is considered creased cap. It comes exactly as pictured with the nuts for installation. This hub and spindle assembly will fit in the replacement bottom rollers (301-1795/ 301-0833) as well as the idlers (160-1300).
If you have a SK1050 with the following serials, your machine requires 5 per side for a total of 10 per machine:
This hub and spindle assembly supersedes 205-1183 and it includes lug nuts 105-1602. The dust cap retainer 205-1213 has been replaced with a screw on cap design that will not fall off like the original design. The lug nuts should only be torqued to 85 foot pounds to prevent damage to the sprocket.
Please Note: There is also another larger, tapered type of hub and spindle (302-6126) that fits on the large rear track roller (140-1452) on certain serial numbers.
We also stock the sprockets, idlers, bottom rollers, and the rubber track for the Ditch Witch® SK 750 and SK 755. Rely on Rubbertrax to have what you need at an affordable price when you need it most.
1-800-719-41601-800-719-4160 Contact
© Copyright 2022 Rubbertrax, Inc. - MiniExcavatorParts.com. All Rights Reserved. All manufacturers, names, symbols and descriptions are used for customer reference needs only, and it is not implied that any parts or rubber tracks are original products of the manufacturer.